Posted on

Siamese Hug Me! Kitty Decorative Pillow

Siamese Hug Me! Kitty appliqued decorative throw pillow by Elizabeth RuffingMy Siamese kitty pillow is all finished and is up in my Etsy shop. I machine appliquéd quilting cottons onto an oatmeal cotton fabric this time. The background has a pattern of diagonal textured lines, but it is all of one natural cotton color. It’s nice and soft.

Siamese Hug Me! Kitty appliqued decorative throw pillow by Elizabeth RuffingI fused all my appliqué pieces onto my background with Wonder-Under, much in the same way as I did with my bunny pillow, only I was able to use a cotton setting on my iron and skip the press cloth, since cottons can withstand more heat than poly fleece.

Siamese Hug Me! Kitty appliqued decorative throw pillow by Elizabeth RuffingI used a machine zig zag stitch to sew around all the raw edges. A stitch width of 2.5 and a stitch length of 0.5 worked well for me. Once the pillow front was appliquéd, I pressed it with some steam, and made my envelope closure for my pillow back. I basted the two back pieces together, pressed them, and then squared them up with a rotary cutter and a quilting ruler. I sewed my front to my backs, pressed again, turned them right side out, and put my pillow insert inside.

Oatmeal-colored cotton, decorative throw pillow with an envelope closureI took some photos and all done!

I also photographed another wide-eyed kitten this week. This is Ian. He and a bunch more equally cute and playful kittens and cats are at PetSmart this weekend, hoping to find their forever homes.

Ian, gray and white kitten for adoption from Alley Cats and Angels, in the Triangle area, Apex, NCPlease consider adopting a pet. There are so many sweet animals out there waiting for homes. I fall in love with one or two or three every week or so! All our kitties are rescued kitties, and they make wonderful family members. Check out sites like Petfinder and Adopt a Pet to find available adoptable pets in your own area. And go visit them too. They love the attention! It makes them happy 🙂

Posted on 1 Comment

Bunny and Slug Pillows

Hug Me! Bunny appliqued decorative throw pillow by Elizabeth RuffingI finished my Hug Me Bunny decorative fleece pillow and made a Hug Me Slug pillow friend for her out of sheeting and quilting cottons. I’m experimenting with which fabrics I like the most for pillows. I think I will try a combination of a fleece background, with sheeting and quilting cottons for the appliqués too. I tried that on my Super Slug and liked how it worked out before.

Hug Me Slug appliqued decorative throw pillow by Elizabeth RuffingI made an envelope closure for each pillow back, in their background fabrics. To do this, you work out the measurements for half your pillow height, plus a hem and seam allowances for the top piece, and the same plus 3 to 4 inches for the bottom piece, by the pillow width. Then sew the hems, overlap the two pieces, and sew them to the front of your pillow, right sides together. Finish the raw seam edges, and turn the pillow cover right side out.

Yellow fleece decorative throw pillow back with envelope closure by Elizabeth RuffingI made a pillow insert so the covers could be taken off and hand washed as needed. It slips right inside the back closure. I found the easiest way to get the insert in was to flip the top half of the back enclosure over so it is inside out, slip the pillow insert inside the bottom half, then flip the top half back over, right side out.

Yellow fleece decorative throw pillow back with envelope closure by Elizabeth RuffingI recommended hand washing for the pillow covers, cool water for fleece, and warm water for sheeting. Sheeting can be ironed with a warm iron on a synthetic setting since I used a poly/cotton blend. My pillow insert can be washed too. I recommend hand washing for handmade items, and leaving them to air dry.

Both pillows are over in my Etsy shop.

Posted on 7 Comments

Fleece appliqué how-to

Hug Me! Bunny applique by Elizabeth RuffingI decided I wanted to try my appliqué throw pillow designs using polyester fleece, only I couldn’t find any tips or tutorials anywhere for doing this by fusing the fleece and using machine stitching, like I’m doing with cottons. I snapped photos as I experimented so I could put together my own tips and a tutorial on the basics.

For starters, you’ll want to cut your background fleece at least 1/2 inch bigger on each side than your pattern says. When you fuse, the fleece shrinks a bit, and machine stitching pulls it in a little too. You’ll also need a paper-backed adhesive web. I prefer Wonder-Under for this. You’ll need a press cloth too. A heavy piece of cotton sheeting worked for me. I find tracing my final design onto tracing paper is very helpful for lining everything up before fusing.

I did my machine stitching both with Sulky rayon thread and regular cotton thread. I used DMC embroidery floss, sewing with one strand, for the smaller appliqués because I was using a machine without adjustable presser foot pressure, which was distorting my smaller pieces. If you don’t have adjustable foot pressure either, and you do have a walking foot, that might work for this too.

Hug Me! Bunny applique by Elizabeth RuffingTo start, using an appliqué pattern of your choice, trace the individual appliqué shapes onto the Wonder-Under, on its paper side, reversing your shapes when necessary. Your final shapes will be in reverse when you fuse, and so you need to keep that in mind. I use a mechanical pencil to trace my shapes. You’ll need to leave an additional scant 1/4 inch of fleece around any area that will be tucked under another shape, and so keep that in mind too as you trace, leaving marks where necessary, as reminders. Usually, these areas are indicated by dotted lines on appliqué patterns.

Once you have traced your shapes onto the Wonder-Under, cut them out leaving a scant 1/4 around the outer edges. Lay your Wonder-Under shapes on the wrong side of your fleece, if you are using fleece with sides that are different. I found the low-pile fleece, the non-anti-pill kind, worked better for this project. Fuse the Wonder-Under shapes on to your fleece, using the synthetic setting on your iron, without steam. This is enough heat for this part of the process.

Hug Me! Bunny applique by Elizabeth RuffingCut your shapes out of your fleece, and then trim by cutting on the lines for shapes that will be on top of other shapes, and leave the scant 1/4 inch where shapes need to be tucked under other shapes. This bunny head goes on top of my design, and so I cut directly on the line.

Hug Me! Bunny applique by Elizabeth RuffingNow to fuse the shapes onto the background fleece…This got tricky, and so be sure to do a trial run on some scrap first to get the right heat setting on your iron. You will need a press cloth because you will need to use a higher setting than is safe for ironing directly on the fleece.

Start by peeling the paper off your shapes, now that they have cooled. Arrange them on the right side of your fleece background, fusible side down, using your traced design, if you made one, as an overlay to line up your pieces. I recommend fusing only one layer of fleece at a time to the background. For this design, I started with the body, collar, and head. Then I added the details, like the eyes, buttons, and heart, once I’d fused the first parts down. It’s hard to get enough heat through the layers to get them to stick. They just need to stick enough to hold them in place while you sew.

When you are ready to fuse your shapes in place, lay your press cloth over the entire background. I found I needed to set the heat on my iron to the minimum temperature that would allow me to use steam, in order to get the shapes to stick to the background. For me, that was the lowest cotton setting. On other irons, this might be the wool setting. Test this temperature on scrap fabric first! Do not put the iron directly on the fleece at this temperature. You will want to keep your iron level as you press, using as little pressure as possible. You may need to hover the iron just over the surface, and use the steam to fuse, so you don’t make pressing lines in the fleece. It takes some experimenting.

Hug Me! Bunny applique by Elizabeth RuffingOnce all your layers are fused onto your background, you’re ready to stitch. I used a machine blanket stitch. If your machine doesn’t have this, a zig zag stitch will work. Again, you’ll want to try this out on scrap first to see how condensed you want your stitch to be, by playing with the stitch width and length. I used a stretch needle for knits. Mine was 90/14 size. If you have adjustable presser foot pressure, you are lucky! I have it on one machine but not the one with the blanket stitch I wanted to use. It helps to lighten the pressure for fleece, even to a “1”. Once again, experiment to see what works best. A walking foot is another alternative (mine fits my other machine that has the adjustable foot pressure. I’ll have to see if I can use an adaptor to fit it to the machine that has the blanket stitch next time).

Hug Me! Bunny applique by Elizabeth RuffingWithout the presser foot adjustment, I was able to sew around all the larger shapes. I used an open-toe foot so I could see what I was doing. With a blanket stitch, be careful to pivot at the right times. My machine went over each stitch twice, and so, if yours does this, you’ll want to pivot after the second pass the needle makes, or the machine will back stitch right into your background fabric, which looks messy.

I tried to machine appliqué the small parts, but my foot kept shoving the little pieces out of whack. I did a lot of complaining over this! I believe there was just too much pressure from the presser foot to do this right, and so I used a single strand of embroidery floss to blanket stitch all the small pieces. I have a tutorial on doing a blanket stitch by hand here. The entire design could be done by hand, if you preferred to do it that way.

Hug Me! Bunny applique by Elizabeth RuffingAnd finally…all appliquéd! I’ll need to trim and square this later, since it pulled in somewhat in the middle areas. In all honesty, this was a difficult project with the machine I used. It took a lot of trial and error, but next time, I will be so much more ready!

Some day, I hope to again have a sewing machine with all the features I wish I had, and did have on my poor ill-fated Viking. But, again, hand stitching works fine for this too, if you aren’t making a lot of appliqués, which I hope to do. I’ve been checking out the various sewing machines on the market, but the the ones that are equivalent to what I had are all so expensive. I’m not done looking yet though. Hopefully, one will have my name on it.

Posted on

Started fusing my appliqué designs onto fabric

Hug Me! Siamese Kitty by Elizabeth RuffingI, of course, redrew parts of my drawings from yesterday, playing around with bunny, kitty, and puppy clothes, and thinning my Hug Me! Slug down a bit. I have to fuss over what I do or I just wouldn’t be myself. Hug Me! Kitty can now be a Siamese or a tuxedo kitty. Today she is Siamese. I really like how her dress came out too. These are photos of the fabric after it was fused onto the background pillow fabric, before I’ve added any machine stitching embellishment.

Hug Me! Slug by Elizabeth RuffingI cut out and fused these two slugs before I thinned them down in my drawing. They’re well-fed slugs. I must be polka dot happy this week. I’m thinking of ordering some solid color cottons too, for variety.

Hug Me! Slug by Elizabeth RuffingIt feels good to be making something with my hands instead of typing, clicking, and moving a mouse around. I’m enjoying “dressing” these little animals too. Once I have the other two characters fused, I’ll start embellishing them with machine appliqué and some decorative stitches as well.