Cinnamon is a sweet little tabby kitten with big amber eyes.
Cinnamon is wearing an ecru pinafore with ruffled sleeves edged in blue. It has an orange-mauve flower in the center of the front that matches her sleeves. Her sleeves have blue polka dots, and her bloomers are blue with mauve polka dots.
Cinnamon comes with her favorite chair, which is upholstered in very pale gold. It is 2 and 5/8 inches tall.
Cinnamon is a one-of-a-kind work of art, and is meant for display only.
She was sculpted from paperclay in multiple stages, to allow for drying and detailing.
Cinnamon was painted under a magnifying light, with tiny brushes, one hair at a time.
She is signed and sealed with matte varnish for protection and preservation, and comes with a certificate of authenticity.
Cinnamon and her chair are 1:12 scale. (One inch equals one foot.)
I made up patterns for catnip toy squares, cigars, and kickers. As I mentioned in my last post, we have additional kitties in the house. I decided I would make some catnip toys to smooth the jealous feelings and cheer everyone up. This is a tutorial showing how I made them.
I based the approximate sizes and shapes on catnip toys I got from a local cat rescue here in North Carolina. They have a variety of catnip toys you can order by mail. They are made with potent organic catnip. Our cats love them. I made mine a little differently, with just catnip inside, instead of stuffing as well. The cats enjoy them either way.
I used Frontier Catnip Leaf and Flower Certified Organic Catnip for mine. I found it online on soap.com and on amazon.com. It comes in a great big 1lb bag, shown below. I have also tried catnip from a seller on Etsy. It isn’t officially certified, but she tells me it is grown organically. Her packages come in a variety of sizes. You can also find organic catnip at Target, Walmart, PetSmart.
I made up template patterns for catnip squares, cigars, and kickers with a choice of cropped corners or squared corners. I made mine with the cropped corners, and my directions are for the toys with the cropped corners. Pictured below are the cigars and 4 1/2 inch squares.
You can also draw the shapes with the following measurements on card stock, and cut them out to use instead, if you don’t have a printer. If you want cropped corners like I have, mark a dot 1/2 inch down from each corner edge, draw lines across the corners, and clip the tips of the corners off your templates. These are the PDF’s of my catnip toy patterns. The sizes shown are the approximate sizes once sewn, before stuffing.
Save them to your computer and print them on 8 1/2″ x 11″ card stock. I had a little trouble printing them, and so be sure to check that you want to print them at “actual size” in the options that appear when you print. On my computer, the only link to print them that worked was the picture link of the little printer at the bottom of the PDF page which shows up when you hover your mouse over the bottom of the PDF page.
To start, cut your paper templates out of your printouts along the outer edges of the solid black lines. Clip off the corners of the paper templates to make the toys with cropped corners, as I did.
Fold your fabric in half, selvedge to selvedge, right sides together. If you are using scraps, arrange them so the lengthwise grain, the same direction as the selvage edge, is lined up and going in the same direction on each piece. The lengthwise grain is the side that stretches the least when you pull it. Lay the paper templates on the fabric with the arrows parallel to the lengthwise grain of the fabric. The long edge of the cigar and the kicker will be parallel to the selvedge edge. The markings for the 2 inch openings will also be parallel to the selvage edge, as shown above.
Be sure to leave at least 1/4″ around each shape (at least 1/2″ between two shapes) for the seam allowances. You will be sewing right on the lines you will be drawing around the templates, and you will need to leave space around the shapes when you cut them out.
Trace around the paper templates with a pencil, drawing the lines on the fabric, marking the opening on each one for turning. I used a mechanical pencil to draw my lines. My openings are 2″ long and centered on the long side of the cigar, and in the middle of the side of the square. It is easier to sew the toys closed if you mark the opening along the lengthwise grain, parallel to the selvedge edge, as I have done above, because there will be less stretch.
After you have drawn your lines onto your fabric, pin the fabric shapes together, and then roughly cut them apart, leaving at least 1/4 inch of fabric around each fabric shape for the seam allowances.
Sew right on top of the lines you drew on the fabric, leaving the 2 inch openings free. I used a tiny 1.2 stitch length. Start sewing immediately past the opening, sew around the edge, and stop when you reach the second mark for where the opening begins.
I wanted to reinforce my seams by sewing them twice and I wanted to reinforce the corners where I clip them. So, this is what I did: I started sewing at one opening mark. I sewed right past my turn at the corner, lifted the needle and presser foot, pulled the fabric a little so I could pivot, and then I continued to sew the next side of the shape, ignoring the crop line. I did this at each corner all the way to the other opening mark, where I pivoted and sewed back in the other direction along my line.
On the second pass through, I sewed the cropped corner lines. When I was back at the first opening, I lifted the needle and presser foot again, pulled the fabric free a little, and sewed across each cropped corner again, edge to edge, to reinforce it. I left the fabric right in the machine, and only pulled it as free as I needed to to sew. When I was done sewing, I just clipped the threads to free the edges from each other. It sounds a little complicated, but I found it easier to do. As long as you end up with your sewing on top of the lines you drew, the rest doesn’t have to be terribly neat.
The picture above show what my corners looked like, once they were sewn, before any trimming.
Now it is time to trim your seam allowances and clip your corners. You need at least 1/4 inch of fabric around the outside of your sewing lines. Your trimming doesn’t have to be very neat. Just make sure you have the extra fabric around the outside of your sewing lines. Treat the first corner clips the same way, leaving at least 1/4 inch of fabric outside the sewing line for your cropped corners, as shown in the picture above.
(If you made squared corners instead of cropped ones, you’ll have just this one clip, at a diagonal across the outside of the corner point. You will need to be careful not to clip too close to the sewing line at the corner point. Before clipping squared corners, I sew diagonally across my corners, to reinforce them, and then I trim next to the diagonal sewing line I just made, leaving about 1/32″ or about three thread widths of fabric outside the sewing line.)
Now for the corner clips. When clipping corners, the first snip you take is roughly in line with the seam line you are facing with the scissors, and the second snip is in line with the next seam line you are facing when you snip. The clip shape looks sort of like a mirror version of the seam line. If you sewed yours the way I did mine, you will have the reinforced sewing lines to use as a guide, as shown above.
Clip close, but not right up to the stitching, leaving about 1/32″ or about three thread widths from the sewing line, on the outside edge, so you don’t poke a hole through when you turn and stuff your toys.
Press the shapes with a steam iron, at the appropriate setting for your fabric. I used cotton fabric, and a cotton setting on the iron.
Fold back one side of your opening, along the drawn line. Press just the opening back along the drawn line. Flip the shape over, and fold the other side of the opening to match. Press just the opening.
The cigar and the square will now look like this, above.
I used hemostats to turn my shapes right side out. Tube turners will work well also. I got my hemostats at Hancock Fabrics, but you can find them on eBay too. Mine have the teeth, which helps grip the fabric. The one I have is called a “Sewing Basket 5 1/2″ Needle Grabber”.
Hold the edge of the shape furthest from the opening, or one of the two, in the case of the cigar. Stick your hemostats inside your opening, and grab the edge you are holding, from the inside.
Pull gently until that edge comes out your opening.
Carefully pull it all the way through. For the cigar, do the same thing for the other half of your shape.
Stick your hemostats back inside the opening and use them to gently push along the seam lines to completely turn the shape right side out. Don’t poke your corners too hard, especially if you are using squared corners instead.
Now your shapes look like this, above.
I poured my catnip into a bowl, so I could scoop it into my openings a little at a time with a spoon. I filled the cigars, shown above and below, on one end, then the other, and then filled in with catnip in the middle. Fill your toys as firmly as you want with the catnip. Our cats seemed to prefer the ones that were more floppy, like bean bags, and weren’t filled all the way.
When you are ready to close them up, pinch the folded edges of your opening together and sew them closed by hand with a slip stitch or a ladder stitch and your closure will be neat and won’t be very visible, as shown below. You can even open the slip-stitching to replace the catnip with fresh catnip later.
The squares are filled the same way, with spoonfuls of catnip. They are a little easier. You can fill them, and pin the openings together before hand sewing them shut. Just be absolutely sure to remove your pins!
These are some recycled catnip squares. I bought these from the local kitty rescue, and after some wear, I emptied them, hand washed them inside out, pressed and sewed them using my 4 inch square templates, and refilled them. They look almost good as new.
Below is one of my finished catnip kickers, which is wider than the cigar, having a soothing effect on Bindi.
I hope my tutorial is helpful to you and that your kitties will enjoy the toys you make for them!
They are popular here. Santana the Peeping Tom Cat, who is a visitor from our neighbors’ house, has his own collection.
Patterns and instructions copyright Elizabeth Ruffing. Please don’t sell my patterns. You are welcome to use the catnip squares, cigars, and kickers patterns to make all the catnip toys you want. Please feel free to make toys to use for fundraisers, to donate to shelter cats, and to give to your friends!
My mom and I had a surprise while we were visiting the duck pond last Friday.
My mom saw something white moving on the opposite side of the pond. I couldn’t make it out exactly either, and so we made our way around to the other side.
As we got closer, I realized there was a mama cat, and at least one kitten, getting a drink by the water’s edge.
They scooted into a brush pile. I saw the kitten’s white feet as she dove into the pile.
My dad’s car broke down recently, and he borrowed mine. So, I had no way to go get a trap. I was very lucky to find a neighbor who was home, who had one. His wife had gotten it, and neither he nor I knew how it operated. We finally figured it out, and I set it up by the brush pile, with food inside.
The black mama cat got in very soon afterward.
I put her in my bathroom, and while trying to transfer her to a carrier so I could reuse the trap, she got loose, and climbed my wall and shower curtain. I thought she was feral, but it turned out she was very tame. She must have either thought I was trying to kill her, or she’d never been inside a house before.
She seemed nervous, and I am sure sure was worried about her baby. Someone must have dropped them off by the highway, which was close to the brush pile.
I brought the trap back through the trees, to the brush pile, checked on it every couple of hours, but no kitten appeared.
I went back around the pond to the same spot, the next day, and left the trap out again. Much to my surprise, when I came back to check the trap, there was a tiny black-and-white tuxedo kitten inside. I was so relieved.
I put the trap in my bathtub and she looked right up at me, mewing. She didn’t seem feral either, and I carefully opened the trap door. She came right out, and let me pick her up. I put her in the carrier where her mom was resting, leaving the door of the carrier open in case they needed to use the litter box.
I could tell the mama was very relieved and happy. She calmed way down, started eating like crazy, and wanted lots of belly rubs.
The kitten was shy at first, but within a couple of days, she and her mom both greeted me with upturned bellies, for belly rubs. I am calling the mama Bindi, and the kitten Jojo. For now, they are staying in my bathroom.
I have been leaving the trap out, now for a couple of hours a day, but no more kittens have shown up. I hope there are no more out there. Update: I put the trap out for eight days, checking it every couple of hours, and no more kittens appeared. I still hope these are the only two that were there.
Please spay and neuter your pets and please consider adopting a pet.